Substrate
Identify the exact materials, surface condition and required bond appearance.
Metal products, PET/BOPP carton and craft
MODEL 1#
High-Tack Hot Melt Glue Sticks for Multi-Material Assembly
A higher-initial-tack EVA route for mixed materials where buyers should validate substrates and visible bond quality.
7 × 300 / 11 × 300 mmProduct format
150–180°CApplication reference
8–15 secondsSet-time reference
Values are technical-data references. Final suitability depends on substrate, equipment and a controlled application trial.
Manufacturer reviewApplication details checked before recommendation
Technical dataProduct-specific TDS available for review
Sample-first approvalScale only after your process trial passes
Technical data
What the current product record states
Published values are reference information from the product file. Confirm process fit before committing to a production order.
- Adhesive type
- EVA hot melt adhesive
- Appearance
- Clear / white transparent
- Size
- 7 × 300 / 11 × 300 mm
- Softening point
- 81 ± 5°C
- Viscosity
- 18,700 CPS at 160°C
- Recommended application temperature
- 150–180°C
- Set-time reference
- 8–15 seconds
- Packing
- 25 kg/carton
Application fit
Confirm the production conditions before ordering
Equipment
Share glue gun or machine format, temperature control and dispensing method.
Process window
Provide application temperature, line speed, ambient conditions and current issue.
Approval test
Run a controlled trial before scale-up and approve performance in real conditions.
Technical documents
Download the evidence with the right scope
Documents are separated by evidence scope so buyers can distinguish product data from general material compliance information.
1# Technical Data Sheet
Technical data linked to the product record. Confirm the latest revision before approval.
Download TDS (.docx) →General Hot Melt Adhesive RoHS Report
This report is supplied for material-document review. Confirm current model and destination scope with sales.
View report (.pdf) →Buyer FAQ
Answers that prevent a wrong sample
Is this adhesive suitable for every machine and substrate?
No. Confirm equipment, substrate, process temperature, line speed and target performance through a controlled trial before scale-up.
Can I download technical data?
Yes. The technical data sheet on this page is linked to this product record; confirm the latest revision with sales before approval.
What information should I send for a sample review?
Share the substrate, equipment or glue gun, operating temperature, process speed, destination and estimated monthly quantity.
Product application review
Send the equipment and material details first.
We will use these details to decide whether 1# is a sensible sample candidate. Final suitability requires your production trial.
Prefer email?sales@jiahongjian.com