EPE foam bonding requires the adhesive to match foam density, application method and production temperature. Jiajian supplies selected pellet products for roller, scraping and tabletop hot melt equipment. A sample trial is recommended before bulk ordering.
Foam bonding adhesives matched to your line and foam density.
Pellet hot melts for laminating and fabricating EPE products.
Bulk EPE-bonding pellets for your industrial customer base.
Protective-packaging hot melts for electronics, appliance and logistics channels.
EPE is a low-surface-energy foam. The wrong adhesive or temperature shows up as weak peel, foam tear or collapsed bond lines.
Reference models from our product data. Final selection is confirmed against your materials, equipment and temperature.
| Model | Form | Color | Typical Application | Equipment | Operating Temp | MOQ | Lead Time |
|---|---|---|---|---|---|---|---|
| 1# EPE Foam Pellets | EVA hot melt pellets | White | EPE foam bonding | Tabletop roller, scraping or coating | 150–160°C | 300kg | 7 days |
Prices are not published. Specifications are reference data confirmed before order approval.
| Your Situation | Product Form | Representative Model | Note |
|---|---|---|---|
| EPE foam-to-foam, roller or scraping | EVA pellets | 1# EPE Foam Pellets | 150–160°C |
| Tabletop / small equipment | EVA pellets | 1# EPE Foam Pellets | Confirm foam density |
| High-density EPE or mixed structure | Formulation review | Confirm by sample | Share foam spec first |
These points decide which product is recommended. You can answer them directly in the form below.
Product, spec, quantity and market
Model and specification review
Sample production and dispatch
You test on your materials
Quotation and packaging confirmed
Production, QC and shipment
EPE is a low-surface-energy foam. Adhesion depends on wetting the foam surface at the right temperature, so density, application method and temperature must be reviewed before model selection.
They can be evaluated with tabletop roller, scraping or coating equipment. Confirm your equipment type and glue-weight requirement before sample selection.
300kg for 1# EPE Foam Pellets. Trial quantities can be discussed for sample evaluation.
Share your current pellet, foam density and bonding structure and we will review a matched product for sample testing.
Foam density changes heat absorption and adhesive demand. Without it we cannot recommend the right formulation — and blind selection is the most common cause of weak bonds.
The form is pre-filled for this application. Include your materials, equipment and monthly usage for a faster recommendation.