Furniture and woodworking applications require the adhesive to match the edge material, board, machine speed and operating temperature. Jiajian supplies selected edgebanding pellets and a 43mm large-diameter hot melt stick for compatible applicators. Product selection must be confirmed through equipment and sample information.
Edgebanding adhesives matched to your line speed and materials.
High-temperature pellets and 43mm sticks for your customer base.
Adhesives and 43mm sticks for woodworking channels.
Bulk edgebanding and woodworking hot melt products.
Edgebanding is one of the most application-sensitive hot melt uses. The wrong adhesive shows up as peeling edges or heat failure in the field.
Reference models from our product data. Final selection is confirmed against your materials, equipment and temperature.
| Model | Form | Color | Typical Application | Equipment | Operating Temp | MOQ | Lead Time |
|---|---|---|---|---|---|---|---|
| K-3205 | Polyolefin stick 43mm | White | Furniture edgebanding | Compatible large-diameter applicator | 180–200°C | 500kg | 20–25 days |
| F6101 | EVA edgebanding pellets | White | PVC / ABS edge band on board | Automatic medium / high-speed edgebander | 180–210°C | 100kg | 2–3 days |
Prices are not published. Specifications are reference data confirmed before order approval.
| Your Situation | Product Form | Representative Model | Note |
|---|---|---|---|
| Large-diameter stick applicator | 43mm stick | K-3205 | Compatibility review required |
| Automatic edgebander, PVC / ABS | High-temp pellets | F6101 | 180–210°C |
These points decide which product is recommended. You can answer them directly in the form below.
Product, spec, quantity and market
Model and specification review
Sample production and dispatch
You test on your materials
Quotation and packaging confirmed
Production, QC and shipment
No. The 43mm stick is never presented as universally compatible. Applicator brand, model, diameter tolerance, operating temperature and substrate must be reviewed before sample production.
High-temperature pellets such as F6101 run at 180–210°C for automatic medium / high-speed lines; medium-temperature products suit lower-temperature equipment. They are not interchangeable — match to your machine.
100kg for F6101 pellets and 500kg for the K-3205 43mm stick. Trial quantities can be discussed for sample evaluation.
Edgebanding performance depends on edge material, board, machine speed and temperature. Without these we cannot recommend the right model — and blind selection is the most common cause of field failure.
The form is pre-filled for this application. Include your materials, equipment and monthly usage for a faster recommendation.