Hot Melt Adhesive for Woodworking & Furniture Edgebanding
Furniture edgebanding is one of the most demanding hot melt applications. The adhesive must hold PVC, ABS or wood-veneer edge tape to panel edges through temperature swings, handling and years of use. Getting the formulation, temperature and open time right is what separates a clean line from a lifted edge.
What Decides the Right Adhesive
- Edge material — PVC, ABS and wood veneer each interact differently with the melt
- Board type — particleboard, MDF or plywood affect heat transfer
- Machine speed — faster lines need shorter open time control
- Temperature — must stay within equipment limits
The 43mm Polyolefin Option
For large-diameter industrial applicators, polyolefin hot melt sticks such as K-3205 are evaluated for furniture edgebanding:
- Diameter: 43mm · Color: white
- Softening point: 125±5°C · Operating temperature: 180–200°C
- MOQ: 500kg · Lead time: 20–25 days
A compatibility review of your equipment and substrate is required before ordering. View 43mm sticks →
Edgebanding Selection Table
| Your setup | Direction |
|---|---|
| PVC / ABS edge tape | Confirm melt temp and open time against machine |
| Wood veneer | Match temperature to avoid scorching |
| High-speed line | Tighter open-time control required |
FAQ
What temperature is used for edgebanding hot melt?
Polyolefin edgebanding sticks such as K-3205 run at 180–200°C. Exact setpoint depends on your applicator and is confirmed during product review.
Can I use EVA sticks for edgebanding?
EVA grades are used in many woodworking bonds, but large-diameter industrial edgebanding often evaluates polyolefin for performance. Tell us your equipment to recommend the right form.
What is the MOQ for edgebanding adhesive?
For 43mm polyolefin such as K-3205, MOQ is 500kg with a 20–25 day lead time. Trial quantities can be discussed for sample evaluation.